Our Hitch Skid with Recovery Point is a must for anyone struggling with ground clearance in the rear of their truck or SUV. Our Hitch Skid helps slide across most inclines and helps from dragging your factory hitch across rocks and trees on the trail. These work great for the Toyota Tacoma’s along with most other vehicles with a 2″ receiver hitch. Our Hitch skid is one size fits most, different vehicles may require utilizing different mounting hole or trimming of plastic to fit.
We are manufacturing these from 2″x2″ square tube with a 1/4″ wall thickness. We weld our recovery clevis to our 10″x8.5″ 1/4″ thick steel plate, then weld the plate to our 2″x2″ square tube for optimal strength. Each component is fully mig welded.
Our 2″x2″ square tube offers 3 different mounting pin holes for a variety of application
Each Hitch Skid comes standard with a recovery point. The recovery point is our clevis mount that is .875″ thick and a 1″ diameter bore. This clevis mount is perfect for a standard 3/4″ inch shackle.
This is our shorter version that allows for a spare tire. We also offer a standard version that has a 10″x10″ Plate and 4 mounting holes.
These are formally known as the Sheridan Hitch Skid made by WarFab Armor. We have taken over the production side of these but keep the same high quality standards that you receive from all WarFab Armor products.
**Please note**
This product is intended for controlled winching/recovery use. Any use outside of the intended purpose or design, or poor recovery practices can result in serious injury or damage. ALWAYS practice safe recovery techniques.
SKU: 200400
| Weight | 13 lbs |
|---|---|
| Dimensions | 12 × 12 × 10 in |
| Powder Coated Black | Yes, No |
Lucas (verified owner) –
Very nice piece – great looking welds. Haven’t had a chance to pull with it but will definitely help keep the rear end of my Gladiator from hitting on the trail!
Abrahim Tawil (verified owner) –
Great bumper skid plate. Looks like it will take a beating and protect my bumper every step of the way. Great looking welds and perfectly powder coated.
John Roth (verified owner) –
Bought for my first trip to Moab with Gladiator to help with any breakover damage. Extremely heavy well built piece. I opted for no powder coating and
Cleaned up sharpish edges and rattle canned with Steel-It. Turned out great.
Welds were very well done with great penetration and shipping was much faster than expected. I will definitely look at these guys for future needs.